EXM
Hazardous Bay Light
The EXM is a low copper aluminum alloy die-cast light which is designed for use in oil and gas refineries, drilling rigs, petrochemical facilities, and paint spray booths. It features a clear shock and vibration resistant, 95% high transmittance polycarbonate lens and can be distributed at 30°, 90°, and 120° beam angles. >70CRI LEDs, has a scalable lumen package of 15,000-31,500lm and comes with an IP68 wet location label and a 5-year warranty.
Resources
CONSTRUCTION
Low copper aluminum alloy die-cast designed for oil and gas refineries, drilling rigs, petrochemical facilities, paint spray booths, and where flammable vapor, gas are present.
OPTICS
Clear shock & vibration resistant, 95% high transmittance polycarbonate lens. Distributions beam angle 30°, 90°, 120°.
ELECTRICAL
>70CRI LED, 50,000hr LED at L70. Scalable lumen package available 15,000 ~ 31,500lm.
-40°C up to 65°C (-40°F up to 149°F) maximum operating temperature. Driver operates at 120-277V input, 50/60Hz, <20% THD, 0.9 power factor.
0-10V / PWM / Rx 3-in-1 Dimming Driver. Built-in standard 6kV surge protection.
Optional 347-480V input. Optional 20kV (120-277V input) or 40kV (347-480V input)
MOUNTING
Yoke Mount as standard. Safety Steel Wire Standard.
Optional ceiling mount (CM), pendant mount (PM), wall stanchion mount (ST), and round pole mount bracket (RP).
STANDARD FINISH
Corrosion resistant Gray finish.
CERTIFICATION
IP68 Wet location label standard.
Luminaires are built to UL844, UL1598A, CSA C22.2 No. 137, CSA C22.2 No. 250.0; standards and bear appropriate cULus labels.
Class I, Div 2, Group A, B, C & D. Gas environment Zone 1 & Zone 2.
Dust environment Zone 21 & Zone 22. IEC/EN 60079-0, 7, 28, 31
WARRANTY
5-year warranty, see Limited Warranty for additional information.
Low copper aluminum alloy die-cast designed for oil and gas refineries, drilling rigs, petrochemical facilities, paint spray booths, and where flammable vapor, gas are present.
OPTICS
Clear shock & vibration resistant, 95% high transmittance polycarbonate lens. Distributions beam angle 30°, 90°, 120°.
ELECTRICAL
>70CRI LED, 50,000hr LED at L70. Scalable lumen package available 15,000 ~ 31,500lm.
-40°C up to 65°C (-40°F up to 149°F) maximum operating temperature. Driver operates at 120-277V input, 50/60Hz, <20% THD, 0.9 power factor.
0-10V / PWM / Rx 3-in-1 Dimming Driver. Built-in standard 6kV surge protection.
Optional 347-480V input. Optional 20kV (120-277V input) or 40kV (347-480V input)
MOUNTING
Yoke Mount as standard. Safety Steel Wire Standard.
Optional ceiling mount (CM), pendant mount (PM), wall stanchion mount (ST), and round pole mount bracket (RP).
STANDARD FINISH
Corrosion resistant Gray finish.
CERTIFICATION
IP68 Wet location label standard.
Luminaires are built to UL844, UL1598A, CSA C22.2 No. 137, CSA C22.2 No. 250.0; standards and bear appropriate cULus labels.
Class I, Div 2, Group A, B, C & D. Gas environment Zone 1 & Zone 2.
Dust environment Zone 21 & Zone 22. IEC/EN 60079-0, 7, 28, 31
WARRANTY
5-year warranty, see Limited Warranty for additional information.
Beam Angle
- 30
- 90
- 120
CCT
- 4000K
- 5000K
CRI
- 70 CRI
Color / Finish
- Gray
Dimming Protocol
- 0-10 V
Lamp Life
- 50000 hrs
Lamp Source
- LED
Listings
- cULus
Lumens
- 15500 Lm
- 31500 Lm
Materials
- Aluminum
- Copper
Mounting
- Ceiling
- Pendant
- Wall
Ratings & Compliance
- Assembled in America
- Buy American Act (BAA)
- Class I Div II
- IP68
- Made in America
- Wet
Voltage
- 120-277 V
- 347-480 V
Warranty
- 5 yr
Watts
- 100 w
- 200 w
Weight
- 18 lbs
- 19 lbs
