Flood Light

CONSTRUCTION
Rugged die-cast aluminum housing with corrosion resistant powder coat paint finish.
Internal venting fins create optimal heat dissipation and allow all water to drain from the face of the luminaire. Simple access to electrical components with removal of four screws from back of fixture housing.

OPTICS
High impact UV stabilized acrylic outer lens protects LEDs and allows for cleaning and debris removal.
Lens hardware is internal to the fixture allowing for uniform pressure on the gasket for an optimal water tight seal.
NEMA distributions: Wide (7x6) Stock Version: 4000K & 5000K

ELECTRICAL
70+ CRI Lumileds LED. -40°C up to 45°C (-40°F up to 113°F) maximum operating temperature.
Long-life 100,000hr LED at L70. Driver operates at 120-277V input, 50/60Hz. <20% THD, 0.9 power factor.
4kV surge protection, 10kV surge protector optional. Optional 347V / 480V Driver. Optional button photocell control.

SENSORS (OPTIONAL)
CONTROL-XFAC AVI-ON Bluetooth Zone Controller Adapter
SENSOR-PH-PB-U Integral button style photocell.

MOUNTING
15/27/45/60W models with Knuckle as standard, Yoke as option.
70/100/135/200W with Slipfitter as standard, Yoke as option.
250/350W with Yoke as standard, Slipfitter Convert Bracket as option.

STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.

CERTIFICATION
IP66 Wet location label standard. Meets Buy America Act requirements. IDA compliant: with 3000K color temperature selection.
All luminaires are built to UL1598 standards and bear appropriate cULus labels. DLC® Premium (DesignLights Consortium Qualified)

WARRANTY
5-year warranty, see Limited Warranty for additional information.