Area Light

CONSTRUCTION
The sleek design single-piece die-cast AD12 aluminum housing has integral heat sink fins maximizing thermal management through conductive and convective cooling.
2 Housing configuration, Standard Housing Dual LED Board up to 33,750lm (225W) Hi-Lumen Housing Quad LED Board up to 67,500lm (450W).
The LED driver is mounted in direct contact with the housing for effective heat dissipation to promote low operating temp and long life.
Housing is completely sealed against moisture and environmental contaminants (IP65). Ultra-low EPA.

OPTICS
Specially designed UV-resistant acrylic optics, available in Type II, III, IV, V distributions.
Silicone gasket ensures a weather-proof seal around each individual optics. Optics rotatable (90° increment) and interchangeable in field.
Full cutoff (U0) when mounted with non-adjustable pole mount (SR) or 0 degree tilt with adjustable Slipfitter (SF), meets Dark Sky requirement.
Optional backlight cover for optics available. Optional house-side shield available.

ELECTRICAL
80+ CRI Samsung LED. -40°C up to 50°C (-40°F up to 122°F) maximum operating temperature. Long-life greater than 100,000 hr LED at L80.
Driver operates at 120-277V input, 0-10V dimmable driver, down to 10%. 50/60Hz, <20% THD, 0.9 power factor.
Standard 4kV surge protection, additional 10kV inline surge protection optional. Optional 347/480V input driver.

SENSORS (OPTIONAL)
SENSOR-BLE-619 Integral PIR ALS Control bluetooth/on/off/dimming/photosensing.
SENSOR-823 Integral PIR on/off/dimming/photosensing.
SENSOR-820 Integral PIR on/off/dimming/photosensing.
SENSOR-PH-PB-U Integral button style photocell.
SENSOR-PH-PT-U/UD/HD Twist lock dimming/non-dimming photocontrol.
CONTROL-LVFA AVI-ON Bluetooth Mesh Controller.

MOUNTING
3G rated (SR) mount allows lightning fast installation of ALS luminaires onto square or
round pole application seamlessly. Optional adjustable slipfitter (SF) for 2-3/8” tenon,
adjustable yoke mount (YM), and non-adjustable wall mount bracket (WM).

STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.
CUSTOM FINISH
Corrosion resistant Black, Graphite Metallic, Gray, Silver, White, Custom RAL#.

CERTIFICATION
IP65 Wet location label standard.
Meets Buy America Act requirements.  Option for “BABAA” compliance upon request. 
IDA compliant: with 3000K color temperature selection.
Dark Sky compliant - U0 3000K CCT. Title 24 compliant; see local ordinance for qualification information.
All luminaires are built to UL1598 standards and bear appropriate cETLus labels. DLC® Premium (DesignLights Consortium Qualified) listed.

WARRANTY
5-year warranty, see Limited Warranty for additional information.